Repairs to uPVC Windows

uPVC is a fantastic option for modern homes. They are durable, long-lasting and easy to maintain. In contrast to aluminium and timber, they are not susceptible to get rusty or decay.

It is crucial to wash and oil UPVC windows and doors regularly. This will reduce repair costs as well as improve energy efficiency.

1. Broken Glass

The broken glass in your windows can cause serious damage to your home, and could even be fatal. You should take the time to make sure that your windows are in good working order.

Single-pane windows are relatively easy to replace, and they typically fit into frames of the past easily. However when you have double glazed window repairs-pane windows that are held in place by internal beading, it will be more difficult to remove the existing panes and install new ones. In this situation, you will need to locate some plastic spacers that assist the new pane to fit correctly into the frame of the window.

Wearing protective eyewear and thick gloves is essential if you plan to remove the glass yourself. It is also an excellent idea to lay down a drop cloth prior to when you start working on the glass to ensure that any fragments of glass fall on the fabric rather than on the floor, where they could be trampled on and cause further damage.

It's a great idea to seal the gap after the glass has been removed. This will prevent drafts and water from getting into your property until a professional arrives to repair the window. This will also act as a barrier that will prevent any intruders to gain access to your home. If the gap is large, you may think about a security door that has an integrated window, since this will offer the best of both worlds.

2. Sagging

Upvc windows and doors are an affordable energy efficient, durable and long-lasting alternative to timber sash windows. However, over time, they can suffer from a variety of issues, including sagging. A sagging uPVC window can cause problems with light, draughts and even security. It's important to take action immediately if you discover that your uPVC windows are sliding.

Repositioning the hinges could help fix a window that is sliding. First, you'll need to unblock the windows so you can access the frame. Then, you can remove the hinges at the top and bottom using a screwdriver and adjust them counter-clockwise or clockwise. Close your window to check the fit after you've relocated your hinges. If you are happy with the fit of the window, tighten the screws to keep them in place.

If you can't reposition the hinges you may require replacing the seal. As time passes, rubber seals lose their elasticity and dry out and cause them to loosen. It is important to replace your seal as quickly as you can in order to ensure that your uPVC window waterproof and draughtproof.

uPVC handles may also become loose. The majority of the time, this is caused by screws that have come loose over time. However, it can also happen because the handle mechanism has been worn out. It's relatively easy to fix a loose uPVC handle. You'll first need to close the window and then perform a test fitting. The corners of the sash should align with the casing joint. If it doesn't then you can use a screwdriver to loosen the handle, and then reverse the mechanism back into its original position.

3. Water Leaks

It is essential to take action if wake up every morning to find a smoky wall and floors that are wet. The leaks of water through windows could cause structural damage to your home, and impact your ability to regulate the temperature inside your home. Most often, uPVC window leaks are caused by a lack or damage to the sealant.

It is a fairly easy fix and should be undertaken by any competent DIYer. Depending on how severe the issue is, old caulking may need to be removed. It is important to remember that when it is about uPVC window repairs you should not be tempted to 'over-caulk and then make the area more difficult to clean and can reduce your energy efficiency.

Verify that the drainage holes are free of debris in them and ensure that the sill pan is angled correctly to drain away from the window. In more extreme situations, you may have to replace the window.

Mold spots and rotted sills are also signs of water leakage. This is a fungus that thrives in damp conditions and is able to quickly spread throughout the home.

It is also important to keep in mind that if the leak originates from the glass in your double glazed windows, it is more likely to be a problem with the glass seal rather than the frame or sagging. Again this can easily be fixed by an uPVC window specialist who can replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be at fault when your uPVC window is difficult to open or it opens in a breeze. They can be repaired by any DIYer who is skilled and can be completed in a matter of minutes.

Nearly every home in the UK will have top-hung or side-hung uPVC windows that have hinges and, just like any mechanical component they are susceptible to wear and tear over time. It is an easy process but it can be easier with someone else to help hold the frame up.

It is also worth checking that the uPVC hinges are being opened and closed in the correct direction. Look for the arrows on each hinge to determine the direction in which the window should be opened.

Faulty Window Repair hinges could be the result of incorrectly opening the window in a particular way or by poor installation at the factory. Sending us a picture through our website can often resolve the problem. We are happy to give advice.

Regular lubrication of the hinges is also necessary. This can be accomplished by applying an oil that is light in nature to the hinges. We recommend using a solvent-free lubricant such as 3-in-one Multi-Purpose Oil. Regularly lubrication will help the window repair to operate and close more easily. It can also stop corrosion and reduce the possibility of sticking. Ideally, you should do this at least once a year. WD40 and other solvent-based lubricants should not be used since they can damage your uPVC windows.

5. Draughts

Draughts can be caused by a variety of different factors. The hinges can also become disaligned as a result of wear, which can cause an opening where the sash meets frame. If they are damaged beyond repair, it may be necessary to have them realigned. The interlock may also become disaligned. It is located on the hinge side and may need to be cleaned. In certain instances, it may be necessary to replace the hinges.

The next most common reason for draughts are the window seals. These are prone to wear or damaged over time, and let air escape through these gaps. This can be prevented by replacing them with high-quality weatherstripping. Replace the upvc windows with low-emissivity glass. This will help control indoor temperatures, and reduce the risk of draughts.

The last way to reduce drafts effectively is to use a Draught-exclusion device. These are usually made of fabric tubes filled with a filler, which can be hung over your window sill. They will help keep cold air out and keep your home warm and cozy!

Your upvc windows can keep providing excellent insulation and security to your home with a little regular maintenance and repairs. It is essential to remember that all windows will eventually get worn out and it could be cheaper to replace them than to repair them. If you encounter any issues with your window made of upvc you should consult an expert immediately.